Hubs

$324.99
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness, while proven 6902 bearings were selected due to their large ball diameter and durability. A 60-tooth drive ring alternately engages six double tooth pawls, giving you 3-deg engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting the internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster but adapts faster.

$267.79 - $293.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano/SRAM 8-11s and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
J-Bend SPECIFICATIONS
- OLD: 148mm
- Left Flange Diameter: 58mm
- Right Flange Diameter: 458mm
- Left Locknut-To-Flange: 36.65mm
- Right Locknut-To-Flange: 51.35mm
- Left Center-To-Flange: 37.5mm
- Right Center-To-Flange: 22.8mm
Straight-Pull SPECIFICATIONS
- OLD: 148mm
- Left Flange Diameter: 55mm
- Right Flange Diameter: 55mm
- Left Locknut-To-Flange: 39.5mm
- Right Locknut-To-Flange: 53.8mm
- Left Center-To-Flange: 34.65mm
- Right Center-To-Flange: 20.35mm

$203.59 - $262.59
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Rear Hub
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
J-Bend Spoke/Quick Release Axle:
- OLD: 135mm
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull Spoke/Quick Release Axle:
- OLD: 135mm
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
J-Bend Spoke/12mm Thru-Axle:
- OLD: 142mm
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull Sple/12mm Thru-Axle:
- OLD: 142mm
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm

$203.59 - $262.59
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
J-Bend/QR:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 32.95mm
- LTF-R: 48.45mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
J-Bend/142 x 12mm:
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 36.45mm
- LTF-R: 51.95mm
- CTF-L: 34.7mm
- CTF-R: 19.2mm
Straight Pull/QR:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 36.2mm
- LTF-R: 50.1mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm
Straight Pull/142 x 12mm:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 39.7mm
- LTF-R: 53.6mm
- CTF-L: 31.45mm
- CTF-R: 17.55mm

$250.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.

$224.99 - $235.79
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/QR Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 32.75mm
LTF-R: 50.05mm
CTF-L: 34.9mm
CTF-R: 17.6mm
Straight Pull Spoke/12mm Thru-Axle:
PCD-L: 35mm
PCD-R: 49mm
LTF-L: 36.25mm
LTF-R: 53.55mm
CTF-L: 34.9mm
CTF-R: 17.6mm
J-Bend Spoke/QR Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 32.65mm
LTF-R: 48.2mm
CTF-L: 35mm
CTF-R: 19.45mm
J-Bend Spoke/12mm Thru-Axle:
PCD-L: 45mm
PCD-R: 50.6mm
LTF-L: 36.15mm
LTF-R: 51.7mm
CTF-L: 35mm
CTF-R: 19.45mm

$230.00
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.

$223.90
DT's 350 MTB rear hub offers top-end performance for all your riding needs. DT Swiss' Ratchet freewheel system provides precise engagement, high load capacity, and reliability. The Ratchet System driver is extremely durable and can be easily serviced—without tools—in minutes thanks to it's press fit assembly. The press fit assembly also allows the hub to work with a wide array of axle configurations; by simply swapping out the tool-free end caps (sold separately), you'll be able to enjoy the legendary DT Swiss quality on almost any bike.
• Accepts 6-bolt rotors

$214.19
- Elite Series convertible fat bike hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- J-bend spoke compatible
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
Quick-Release:
- LTF-L: 48.65mm
- LTF-R: 48.65mm
- CTF-L: 36.5mm
- CTF-R: 36.5mm
12mm Thru-Axle:
- LTF-L: 52.15mm
- LTF-R: 52.15mm
- CTF-L: 46.5mm
- CTF-R: 46.5mm

$192.79 - $214.19
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm

$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes

$209.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body

$124.39 - $201.99
- Centerlock, 11-speed compatible road hubs
- Sealed bearings keep out contamination and dirt while providing a smooth rotation
- Skewer included

$199.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6-degree engagement
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- PCD-L: 58mm
- PCD-R: 58mm
- LTF-L: 37.71mm
- LTF-R: 50.81mm
- CTF-L: 36.44mm
- CTF-R: 23.34mm

$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available

$186.99
Shimano's Track Dura-Ace Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed. You get your choice of single or double-sided cog threading.

$107.19 - $182.19
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/6-Bolt Disc:
PCD-L: 36mm
PCD-R: 36mm
LTF-L: 27.75mm
LTF-R: 15.25mm
CTF-L: 22.25mm
CTF-R: 34.75mm
J-Bend Spoke/Centerlock Disc:
PCD-L: 45mm
PCD-R: 45mm
LTF-L: 27.25mm
LTF-R: 15.45mm
CTF-L: 22.75mm
CTF-R: 34.55mm

$182.00
- Adjustable double sealed cartridge bearings and labyrinth seals
- Wide canted flanges build a no dish wheel
- Large 8mm bolts and knurled washer face for maximum hold
- Accepts 24tpi BMX freewheels. 300g
- 32-hole
- Made in USA

$175.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm

$123.39 - $171.39
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Front Hub
- Bearing: Sealed
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- OLD: 100mm
J-Bend Spoke:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull Spoke:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm

$123.39 - $171.39
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Wt: 180g
J-Bend:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm

$170.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

$168.99
Shimano's Dura-Ace Track Hi-Flange Hubs build up into stiff, fast spinning wheels that want to sprint right out off the line. Stainless steel bearings and Borozon treated bearing races minimize drag for maximum efficiency and speed.

$168.39
- Singlespeed freecoaster hubs with 9-tooth driver
- Sealed bearings
- Use: Rear
- Gears: Singlespeed w/ 9-tooth driver
- Drilling: 36
- Axle: 14mm
- OLD: 110mm
- Bearing Type: Sealed

$136.59 - $167.99
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Shimano and XD cassette body options with 6 pawl/54 point/6.6° engagement
- Straight pull and J-bend spoke options
- 6-bolt disc brake rotor compatible
- Sealed bearings
J-Bend SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 58mm
- Right Flange Diameter: 45mm
- Left Locknut-To-Flange: 27.05mm
- Right Locknut-To-Flange: 15.05mm
- Left Center-To-Flange: 27.95mm
- Right Center-To-Flange: 39.95mm
Straight-Pull SPECIFICATIONS
- OLD: 110mm
- Left Flange Diameter: 55mm
- Right Flange Diameter: 55mm
- Left Locknut-To-Flange: 31.5mm
- Right Locknut-To-Flange: 19.5mm
- Left Center-To-Flange: 23.5mm
- Right Center-To-Flange: 35.5mm

$161.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

$153.99
- Aluminum Hub Shell
- Super polished Bearing Races
- Over Locknut: 120mm
- Stainless Steel Ball Bearings
- Contact Sealing: Dust Cap
- Average Weight: 298g (w/o lockring)

$152.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Durable sealing performance
Page 1 of 4
Next page