Hydration

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.

Caged up. Molded from a strong Carbon composite, the Speed-C cage strikes the balance between weight and features. Where it thrives: On the bike, out in the elements What it's built for: Durability, Convenience Highlights: - Ultralight - Easy in & out - Smooth and secure

The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features. This Front-end hydration system easily mounts between aerobars so you don't have to deviate from the aero position to stay hydrated. - Flexible hose with bite valve - Flip cap for refill port - Secure mounting bracket and easy to remove bottle - Straw can be mounted in either the front or rear - Shape design to improve airflow onto the frame - Bottle Construction: BPA-Free, Food safe HDPE Bottle - Bottle Capacity: 30oz (880ml) - Compatibility: Aerodrink BTA bracket - BTA Construction: Injected nylon/glass fiber construction - Extension Width Requirement: 65mm - 140mm (center - center) - Weight: 289g (System), 130g (Bracket Only)

Profile Design's RM-L system provides a sleek and aerodynamic way to address your on-the-bike hydration needs. The strong metal bracket attaches quickly and easily to your saddle rails. It has spots for up to three bottle cages of your choice. It even includes two lightweight Profile Design Kages to get you started. Placing your bottles behind the saddle creates a cleaner aerodynamic profile for your bike, resulting in time and energy savings over the course of your next Tri.

Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions

Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz

XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages

XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.

Low profile, sleek between-the-arms hydration system design improves bike handling by moving the complete volume of the bottle between the riders arms. - Engineered, patent-pending no-splash refill port - Top section features a symmetrical NACA airfoil shape with Kamm tail, reducing overall drag - Compatible with Aerodrink BTA Bracket (80mm - 140mm (center to center)) - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: FC25 - 25oz (739ml), FC35 - 35oz (1035ml)

- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)

Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits

Your water bottle is one of the most important pieces of equipment on your bike. Keep it stable with the carbon fiber Ritchey WCS Carbon Water Bottle Cage. This lightweight cage was designed by Tom Ritchey to perform on the roughest roads or the most gnarly mountain bike trails. - Carbon bottle cage shape designed by Tom Ritchey - Extra strong grip, perfect on the roughest or smoothest rides - Matte UD carbon with black or white logos - 32g

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension

Bring along the essentials with the Hot Laps 2L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. We bet you'll agree that there's nothing like the freedom of the sleek and functional Hot Laps 2L Lumbar Pack. - Breathable air mesh back panel - Two deployable side water bottle pockets - Internal organization - Padded, fleece-lined, zippered phone pocket - External attachment straps

PRISM Carbon is Elite's top-of-the-line bottle cage made of polymer-matrix composite reinforced with lightweight, yet super-strong carbon fiber. Light, ergonomic, and resistant, PRISM Carbon provides a unique combination of high performance, unique design, and easy-access storage for your bottles when space on the frame is limited. PRISM Carbon's distinctive feature is the structure designed to allow a practical side insertion of the bottle, compatible with all frames yet particularly suitable to fit MTBs, smaller bike frames, or sloping top tubes where cyclists need to optimize their hydration process due to the extreme trail conditions of off-road routes and rough terrains.

Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow

Update or replace your lumbar reservoir. This 3-liter lumbar reservoir is just like the one that comes in our mountain bike hydration packs. The 100-ounce design includes a wide mouth for easy filling and a high-flow valve for efficient drinking. - 3L / 100 oz Dakine x Hydrapak 3D lumbar reservoir w/quick disconnect - Blaster high-flow bite valve w/ shut-off - Quick-disconnect tubing for easier refills - Molded 3D bottom provides better shape inside pack - Molded 3D bottom for much better drying between rides

The Axis Ultimate Carbon Cage is light, strong, and subtle. - Lightweight - Superior bottle retention - Aerodynamic design - Weight: 20g

The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.

- Leak-proof and easy to fill with SLIDE SEAL - PLUG-N-PLAY allows quick removal of the hose - Free from BPA and PVC

The durable Hydration Bladder 2 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 2L - Weight: 130g - Measures: 17 x 32 x 1cm

The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 3L - Weight: 140g - Measures: 18 x 42 x 1cm

Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes

Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.

Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.

The HSF BTA offers improved positioning versatility, better retention, and the ability to mount a Garmin computer above the bottle. The HSF BTA takes a minimalist approach to providing the maximum versatility for a between the arms bottle mount. The low weight, high retention, setback mount point, and integrated computer mount give everything you need and nothing you don't. The mount is offset so that the center point of the bottle bolts can sit well behind the attachment point. This allows the cage/bottle to be set further back on aerobars that would otherwise force the bottle forward to the point where it is inaccessible. The mount has a slightly dropped 'V' shape to help center it between the extensions and reduce the risk of the bottle interfering with narrow armrest positions. It also accommodates a greater range of extension widths than the previous models. - Construction: Injected nylon/glass fiber construction - Compatibility: HSF Bottle or use with Standard Cycling Water Bottle - Computer Compatibility: Garmin: Mount is optional and can be removed. (Wahoo: Adapters available via 3rd party purchase). - Mount offset: 30mm - Mount drop: 10mm - Extension Width Requirement: 80mm - 120mm (center - center) - Weight: 100g

Bring along the essentials with the Hot Laps 1L Bike Lumbar Pack. Your mini-tool, a tube, and some food pack into the organized main compartment, which includes a dedicated fleece-lined phone pocket and some organizers. If you're headed out under cloudy skies, there's just enough room for a packable jacket too. And lastly, the sleek deployable side water bottle pocket helps you stay hydrated. - Breathable air mesh back panel - Deployable side water bottle pocket - Internal organization - Padded, fleece-lined phone sleeve - External attachment straps

Even optimists get flats sometimes. The Hot Laps Stealth is the perfect remedy for people not wanting to wear a pack (or anything) when cranking out laps at the park or local trails. Designed to be worn under a jersey, the Stealth features just enough storage to keep you from walking home: a mini-tool, spare tube, a gel, your phone, and some cash. Bonus: the Polygiene treatment keeps the bag odor-free for multiple rides. - Under-jersey storage solution - Breathable air mesh back panel - Deployable side water bottle pocket - Internal fleece-lined phone pocket - Spare tube or sunglasses storage - Zippered side pocket - Micro-stretch waistbelt for added comfort

The Dakine 3L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

Vico is the first-choice carbon bottle cage used by the best World Tour teams. Feedback given by champions made it possible to design and manufacture this bottle cage, so it could meet all riders' needs. Many years of races and victories with the world's best professional teams have helped us design, test, and create a bottle cage that will meet the expectations of even the most demanding cyclists. - Injection bottle cage - Carbon fiber - Extremely light - Grips bottle firmly yet insertion/removal is very easy - Weight: 23g - Made in Italy

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

The Dakine 2L Hydrapak design of the Replacement Reservoir is engineered to be durable and easy to use. The Shape-Loc center baffle adds some rigidity to the shape of the bladder, which cuts down on shifting of water weight while you're in motion and makes for a more resilient design. Meanwhile, the wide-mouth opening and plug-and-play connecters make it easy to fill, drain, and clean. And, of course, it's BPA- and PVC-free.

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm

- Lightweight and durable carbon composite construction - Standard loading configuration - Cage design provides secure bottle retention with easy in/out accessibility - Raw carbon composite finish with multiple color detail options - Includes hardware - 28g - Mount: Braze-on

Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year

Fits any bottle and keeps them cool! Universal and insulated bottle holder that can mount on handlebars or frame! - Fits any bottle/can up to 3" diameter - Works on handlebars, frames, strollers, ATV's, poles, chairs, backpacks, and other?? - Includes 3 hook-and-loop straps with a rubber coating to prevent slipping. - Dimensions: 6" x 4.5"

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

The Quick Cage 3-bolt Adapter is made from high-impact nylon with stainless steel inserts and is designed to hold any 2 or 3-bolt cage, such as the Anything Cages by King Cage, Salsa, and Blackburn. Stuff sacks, sleeping rolls, tents, as well as extra-large water bottles are all game.

The SKS Anywhere Adapter with VeloCage Bottle Cage allows you to mount a bottle cage anywhere on your frame. Remove the bottle cage, and almost anything can be placed anywhere on your bike frame. Perfect for bikes that do not have water bottle cage mounts. The double-sided hook-and-loop straps are super strong and long enough to go around almost any frame tubing—cut straps to desired length after placement. Designed to mount water bottle cages, mini pump mounts, and other standard items, the straps can also be used to strap on jackets, bananas, energy bars, trail tools, fishing poles, and more. Cage is included in case that is your main purpose for the adapter.

The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides

Replacement front and rear mounts for the FC-25 and FC-35 hydration systems. Kit Includes: - Computer Mount - Storage Box - Rubber Band - Clip System

The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. - easy to connect bracket to handlebar or stem - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides

- Lightweight construction of extruded, CNC-machined, and heat treated aluminum - Upper bottle catch ensured bottles stay in place - Designed without an integrated pump bracket - Oval holes allow for adjustable mounting on frames - Weight: 39g

Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

B-RAD Everywhere Base 3

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

The PDW Hot Take cup holder is adjustable to hold most any size of travel thermos. Its soft design will keep hot or cold liquids at arm's length, secure and rattle-free.